)
ECH20 Check Handheld Reader
Home » ECH20 Check Handheld Reader
ECH2O Check Handheld Reader for EC10 EC20
The ECH2O Check is a hand-held readout device for use with ECH2O EC-10 and EC-20 probes*. With ECH2O Check, you can make rapid measurements of your installed ECH2O probes. Simply plug in the ECH2O probe's 3.5 mm connector and press the left button of the ECH2O check to get an instant reading of water content. You can also adjust the calibration of the ECH2O check for the specific soil type you are measuring. Readings are displayed in units of volumetric water content (m3/m3), inches per foot (in/ft), or millivolt output.
Product Description
PORTABLE MONITORING of your low-cost ECHO probes has never been easier. ECHO Check handheld meter provides a convenient readout for the field. Simply plug in the 3.5mm connector from ECHO probe and push the button on ECHO Check to get an instaneous reading. Readings are displayed in units of volume percent (cm/m), inches per foot (in/ft), or millivolts.
Measure water content in the field.
Quick Readout
Lightweight & Portable
Accuracy 3%
Specifications
Measurement Speed: Less than 1 second
Resolution: 1mV, 0.1% 0.01 in/ft. Adjustable Calibration
Accuracy: +/-3%
Power: 3.6V lithium battery (5-7 year battery life)
Case: Stainless Steel with silicone elastomer spacer.
Case dimensions: 3.5 x 4 inches (oval)
Weight: 115g (4oz.)
Warranty: One year parts and labor.
Operating environment: 0 to 40c.
Carrying case: Black 400 denier holster with belt clip and Velcro closure.
Sensor: ECH2O models EC-10 and EC-20
Note: The ECH2OCheck is for use only with the EC-5, EC-10 and EC-20 model of ECH2O probes. It does not currently measure the ECHO-TE sensors.